標籤: EMC

Technology Foundations E20-593考試題庫由KillTest認證題庫網資深IT認證講師和Technology Foundations產品專家結合PROMETRIC或VUE的真實E20-593考試環境最新原題傾心打造。題庫覆蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾題庫對Technology Foundations E20-593(Backup & Recovery Implementation Exam)考試原題完整覆蓋。E20-593題庫助您輕鬆通過認證考試，一次不過全額退款。

1.Which NetWorker command can be used to find out the dates that a specific save set has been backed up?
A.mminfo
B.mmls
C.nsrinfo
D.nsrls
Answer: A

2.You are designing a backup schedule for a file system that changes frequently.
Which NetWorker weekly backup schedule results in the fastest recovery?
A.Full incr incr incr incr incr incr
B.Full 1 2 3 4 5 6
C.Full 4 7 4 7 4 7
D.Full 8 8 8 8 8 8
Answer: D

3.Which NetWorker server daemon is responsible for starting other server and storage node daemons?
A.nsrd
B.nsrjobd
C.nsrmmdbd
D.nsrmmgd
Answer: A

4.You want to make sure that only NetWorker Server S1 can back up client C1’s data. What do you need to do?
A.Add C1 to /nsr/res file on the NetWorker Server S1
B.Add C1 to /nsr/res/clients file on the NetWorker Server S1
C.Add S1 to /nsr/res/permissions on the client machine C1
D.Add S1 to /nsr/res/servers file on the client machine C1
Answer: D

Technology Foundations E20-593(Backup & Recovery Implementation Exam)考題由我們的資深IT認證講師和Technology Foundations產品專家精心打造，包括了當前最新的真實E20-593考題，全部附有正確答案。所有購買KillTest E20-593 題庫的客戶都將得到60天的免費升級服務，保證了客戶的一次通過率。KillTest IT認證題庫網助您一次通過Technology Foundations E20-593考試。

Legato Cert E20-370考試題庫由KillTest認證題庫網資深IT認證講師和Legato Cert產品專家結合PROMETRIC或VUE的真實E20-370考試環境最新原題傾心打造。題庫覆蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾題庫對Legato Cert E20-370(Networked Storage – CAS Implementation)考試原題完整覆蓋。E20-370題庫助您輕鬆通過認證考試，一次不過全額退款。

1.The customer’s Centera is using CentraStar 3.0.  A third-party vendor implemented an application and requested that a virtual pool and profile be created on the Centera. The application fails in its attempt to write to the Centera. What is a possible problem?
A.CE+ is enabled so no data can be written to the Centera
B.PEA file was never provided to the application
C.Replication wasn’t turned on
D.Storage pool creation not completed
Answer:B

2.What is the maximum number of nodes in a Gen 4 Centera Cube?
A.4
B.8
C.16
D.32
Answer:C

3.Clips need to be migrated from the default pool to a virtual pool.  An access profile has already been created.Sequence the following steps to migrate clips:
1) Grant the profile access to the pool
2) Create application virtual pool
3) Start migrating poolmappings
4) Set the home pool for the access profile
5) Create poolmapping
A.2, 4, 1, 5, 3
B.2, 5, 4, 1, 3
C.2, 1, 4, 5, 3
D.2, 1, 5, 4, 3
Answer:A

Legato Cert E20-370(Networked Storage – CAS Implementation)考題由我們的資深IT認證講師和Legato Cert產品專家精心打造，包括了當前最新的真實E20-370考題，全部附有正確答案。所有購買KillTest E20-370 題庫的客戶都將得到60天的免費升級服務，保證了客戶的一次通過率。KillTest IT認證題庫網助您一次通過Legato Cert E20-370考試。

EMC是Electro Magnetic Compatibility的縮寫，即電磁兼容。隨著電氣電子技術的發展，家用電器產品日益普及和電子化，廣播電視、郵電通訊和計算機網絡的日益發達，電磁環境日益復雜和惡化，使得電氣電子產品的電磁兼容性(EMC電磁幹擾EMI與電磁抗EMS)問題也受到各國政府和生產企業的日益重視。電子、電器產品的電磁兼容性（EMC）是壹項非常重要的質量指標，它不僅關系到產品本身的工作可靠性和使用安全性，而且還可能影響到其他設備和系統的正常工作，關系到電磁環境的保護問題。

EMC包括EMI(電磁幹擾)及EMS(電磁耐受性)兩部份，所謂EMI電磁幹擾，乃為機器本身在執行應有功能的過程中所產生不利於其它系統的電磁噪聲；而EMS乃指機器在執行應有功能的過程中不受周圍電磁環境影響的能力。

What is the recommended minimum amount of memory in a management station for an EMC VisualSAN 4.0 installation in a mid-sized SAN?
A.256 MB
B.512 MB
C.1 GB
D.2 GB
Answer:C

Which describes the non-blocking architecture deployed in M-series switches?
A.Allows frames to be sent to destination ports based on the receiving ports availability
B.Switch operations which move data across the bus into CMM and finally to MPC for delivery
C.Memory based operations which fence partitions of memory into bit-buckets for data delivery
D.Allows memory segmentation across the s/bar platform permitting data re-direction based on ASIC availability
Answer:A

Specialist e20-530考試題庫由KillTest認證題庫網資深IT認證講師和Specialist產品專家結合PROMETRIC或VUE的真實e20-530考試環境最新原題傾心打造。題庫覆蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾題庫對Specialist e20-530(networked storage-san specialist exam)考試原題完整覆蓋。e20-530題庫助您輕鬆通過認證考試，壹次不過全額退款。