作者: admin

70-291

MCSA 70-291考試題庫由KillTest認證題庫網資深IT認證講師和MCSA產品專家結合PROMETRIC或VUE的真實70-291考試環境最新原題傾心打造。題庫覆蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾題庫對MCSA 70-291(Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure)考試原題完整覆蓋。70-291題庫助您輕鬆通過認證考試，一次不過全額退款。

You are the network administrator for BlueYonder Airlines.The company uses a single Active Directory domain named blueyonderairlines.com. The company network consists of three subnets. The subnetsare connected by two hardware routers. Each subnet contains one Windows Server 2003 computer with the Routing and Remote Access service enabled andconfigured.The relevant portion of the network is configured as shown in the Network exhibit. (Click the Exhibitbutton.)  Users on the 192.168.30.0/24 subnet report that they cannot access resources on Server1.You verify that Server1 and Server2 can connectto each other. You run thetracert command on Server3 and view the output shown intheTracert exhibit. (Click the Exhibit button.) You need to ensure that users on all three segments of the network can access resources on Server1. What should you do?
A. Modify the route to the 192.168.30.0 network in the routing table on Router1.
B. Modify the route to the 192.168.10.0 network in the routing table on Router2.
C. Modify the route to the 192.168.30.0 network in the routing table on Server1.
D. Modify the route to the 192.168.10.0 network in the routing table on Server2.
E. Modify the route to the 192.168.10.0 network in the routing table onServer3.
Answer: B

MCSA 70-291(Implementing, Managing, and Maintaining a Microsoft Windows Server 2003 Network Infrastructure)考題由我們的資深IT認證講師和MCSA產品專家精心打造，包括了當前最新的真實70-291考題，全部附有正確答案。所有購買KillTest 70-291 題庫的客戶都將得到60天的免費升級服務，保證了客戶的一次通過率。KillTest IT認證題庫網助您一次通過MCSA 70-291考試。

RF0-001

RFID+ RF0-001考試題庫由KillTest認證題庫網資深IT認證講師和RFID+產品專家結合PROMETRIC或VUE的真實RF0-001考試環境最新原題傾心打造。題庫覆蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾題庫對RFID+ RF0-001(RFID+ Certification)考試原題完整覆蓋。RF0-001題庫助您輕鬆通過認證考試，一次不過全額退款。

RFID+ RF0-001(RFID+ Certification)考題由我們的資深IT認證講師和RFID+產品專家精心打造，包括了當前最新的真實RF0-001考題，全部附有正確答案。所有購買KillTest RF0-001 題庫的客戶都將得到60天的免費升級服務，保證了客戶的一次通過率。KillTest IT認證題庫網助您一次通過RFID+ RF0-001考試。RFID+ Certification(RF0-001 Exam)屬於RFID+認證考試中的一門，如果需要取得RFID+證書，您可能還需要參加其他相關考試，詳情可訪問RFID+認證專題，在那裡，你將看到所有RFID+認證相關考試科目。

1. A customer has an RFID system to sort packages by their destination in real time. When first installed, the system worked properly but now most packages are not going to the correct destination. Which of the following BEST describes the cause of this problem?
A.There are increased losses in the antenna cabling.
B.Interrogator output power has degraded over time.
C.Sensors that control the interrogator were repositioned.
D.The customer is using a bad batch of tags.
Answer: C

2. An animal identification system is used in feedlots and transfer gates are equipped with 135 kHz interrogators and are of a size to support one animal. When two animals attempt to get through at the same time, a problem occurs because the:
A.135 kHz systems do not have anti-collision algorithms.
B.135 kHz interrogator system is broken because of the congestion.
C.animals expand the gates to a size where the second animal cannot be read.
D.animals are moving too slowly to be read only once.
Answer: A

3. Pallets in a freezer are tagged with passive ultra high frequency (UHF) tags. The interrogator at the loading dock has a high misread rate on pallets from the freezer. The MOST likely cause of the high misread rate is that:
A.there is a higher temperature in the trailer.
B.there is condensation on the tags.
C.the tag and interrogator are at different temperatures.
D.the tag temperature is too low.
Answer: B

E20-532

Specialist e20-532考試題庫由KillTest認證題庫網資深IT認證講師和Specialist產品專家結合PROMETRIC或VUE的真實e20-532考試環境最新原題傾心打造。題庫覆蓋了當前最新的真實考題，並且全部附有正確答案，我們承諾題庫對Specialist e20-532(networked storage-san specialist exam for storage admins)考試原題完整覆蓋。e20-532題庫助您輕鬆通過認證考試，一次不過全額退款。

1.Which is an EMC recommended best practice when doing fabric zoning?
A.Single FA zoning
B.Multiple FA zoning
C.Single HBA zoning
D.Multiple HBA zoning
ANSWER: C

2.When are zoning changes made in EMC VisualSAN 4.0 saved on a DS-16B2 switch?
A.Immediately
B.When they are refreshed
C.When they are committed
D.At next 30 minute information refresh
ANSWER: C

3.HBA has been replaced on a host in a customer environment. After rebooting the host, you notice that the host still sees all storage devices on all paths. What are two [2] reasons this could happen?
A.There is no LUN masking deployed on the storage array
B.Zoning has been disabled on the switch or hardware/port zoning is in effect
C.The WWPN of the host has not changed and hence there is no need for any changes to the SAN
D.The old HBA has the same WWPN as the new one
ANSWER: AB

Specialist e20-532(networked storage-san specialist exam for storage admins)考題由我們的資深IT認證講師和Specialist產品專家精心打造，包括了當前最新的真實e20-532考題，全部附有正確答案。所有購買KillTest e20-532 題庫的客戶都將得到60天的免費升級服務，保證了客戶的一次通過率。KillTest IT認證題庫網助您一次通過Specialist e20-532考試。